Arajeez Training Services

Arajeez Company (LLC), its management and employees shall provide Training services that is in accordance with high techniques and professional instructors, customer requirements and intended use, as stated in the Training Plans and all supporting documentation. It is committed to give its customers the highest level of Quality and Professional service that adheres to the current training standards, ISO/IEC 9001. It is also committed to the continuous improvement of this management system for total customer satisfaction.

Calibration services Calibration Company Iraq Basra

Arajeez Company is a registered Iraqi company located in Basrah,

Calibration services Calibration Company Iraq Basra

Please find below the range of Training services that ARAJEEZ currently providing:

Rigger Course

 A RIGGER. A certified rigger is a person who has been trained and certified to handle and move loads. The level of certification depends upon the individual’s training, knowledge, skill base, and ability to perform functions related to the selection, inspection, and proper use of rigging equipment.(Accredited By LEEA)



Lifting Supervisor Course

Upon completing the training participants will be competently trained as a lifting supervisor with adequate safety knowledge and skills to supervise all lifting operations in accordance with the lifting plan. They should be able to: Control of the lifting operation.


Forklift Operator Course

Forklift operators are responsible for receiving, moving and distributing materials throughout a warehouse. Daily tasks of a forklift operator include storing materials, documenting inventory and pulling items for production or shipping. … Perhaps the most important aspect of a forklift operator’s job is safety.

Be a Certified Forklift Operator

  1. Step 1: Get Related Work Experience. Many employers seeking forklift operators look for candidates with at least 1 year of related experience. …
  2. Step 2: Develop Strong Communication Skills. Most employers desire candidates with strong communication skills. …
  3. Step 3: Get Certified.

Safety Foundation Course

safety training is a process that aims to provide your workforce with knowledge and skills to perform their work in a way that is safe for them and their co-workers. In addition, an effective workplace safety plan includes instructions and guidelines to identify hazards, report them, and deal with incidents


Confined Space Course

confined space also has limited or restricted means for entry or exit and is not designed for continuous occupancy. Confined spaces include, but are not limited to, tanks, vessels, silos, storage bins, hoppers, vaults, pits, manholes, tunnels, equipment housings, ductwork, pipelines, etc.


H2S Course

H2S – Hydrogen Sulfide Training. Hydrogen Sulfide, or H2S, is a colorless, poisonous gas that is made from the action of acids on sulfides. It is a very common hazard found in the oil and gas, or petrochemical industry.


Work at height Course

Work at height means work in any place where, if precautions were not taken, a person could fall a distance liable to cause personal injury. You are working at height if you: work above ground/floor level. could fall from an edge, through an opening or fragile surface



scaffolding Safety Training

The key issue to safety when working on scaffolding boils down to whether or not the scaffold is safe to work on. This means working on scaffolding that has been erected by trained professionals under the supervision of a competent person and that the scaffold has been properly inspected before use


Fire watch Course

Fire watch personnel maintain surveillance of areas where hot work — welding or cutting with torches — has occurred. Welding and cutting both cause sparks and bits of molten metal to fly into the surrounding area. The fire watch maintains a lookout for small fires started by these sparks and bits of slag.



Hot Work Safety Course

hot work as any work that involves burning welding. the roles of the hot work operator fire watch and permit authorizing individual in hot work safety. the components of a completed hot work permit common. hot work hazards and ways to prevent them and how to arrange a fire safe area for temporary hot work.


Flagman Course

flagman is an employee of the railroad who is assigned to protect contractors or anyone performing work on a railroad right of way. When a train approaches a location where workers may foul the track, the train crew will have to get permission from the flagman to pass the work area.



Environmental Awareness Training

This environmental awareness training course highlights how employees activities, the materials or products they use and create, can harm the environment. The course is designed to promote more sustainable environmental practices within the workplace.


HSE Supervisor Training

HSE Training Challenge. You need to establish training programs that educate your own employees and your supply chain partners about health & safety, environmental and quality issues in the workplace.


Waste Managment Training

All of our introductory courses will give you a comprehensive and up-to-date introduction to waste management.

The program content and learning outcomes differ for each course, so please use the information below to help you decide which is suitable for you.

Operator Assessment Course

This should be undertaken by operators who regularly use and operate tractors and machinery for work purposes. In this instance the training course and assessment is carried out separately at different times and by different people. One person cannot train and assess the same operator. Separate assessment is taken once an operator is satisfied that the assessment criteria can be fulfilled. A separate training course maybe undertaken before the assessment. The National Proficiency Test Council provide assessment mechanisms for a wide range of machinery used in the , amenity horticultural, artificial surfaces, golf courses and sports turf industries.


PWHT Course

PWHT technicians control the heating and cooling cycles of components and materials for use in the Power Generation, Petrochemical, Chemical, Mining, Oil & Gas and Aerospace industries.


Blaster & Painter Course

This course is designed to provide delegates with a basic knowledge of the blaster/ painter industry. It will include the responsibilities of the blaster/painter on current health and safety, environmental and quality requirements.



Destructive testing Course

Destructive testing are the tests which are carried out to the specimens failure.Benefits: Verifies properties of a material. Determines quality of welds. Helps you to reduce failures, accidents and costs.


Six Sigma Course

Six Sigma is a disciplined, data-driven approach and methodology for eliminating defects (driving toward six standard deviations between the mean and the nearest specification limit) in any process – from manufacturing to transactional and from product to service.


Contact Info: –

Mobile: 00964 7800 999 220 - 00964 7713 171 131
Address: Said Amin Street, Al Baradyiah, Basra, Iraq